Dell Inspiron B130 Series Keyboard Specification:
Dell Inspiron B130 Series Laptop Keyboard

Layout: US Version
Letter: English

Remark: Ribbon cable included

Dell Inspiron B130 Series Keyboard warranty:
NOTICE:
1. The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard.
2. To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place.

Full One Year Warranty !

How to Correct Problem Dell Inspiron B130 Keyboards

Virtually all computer Dell Inspiron B130 keyboard are open to the air. Over time, everyday dust, pet hair, air vapor, cigar/ cigarette smoke, and debris from hands and ordinary use settles into the Inspiron B130 Dell keyboard. Eventually, accumulation of this foreign matter causes keys to stick constaining their free movement or prevent keys from making proper contact (for example, a key may not work every time it is pressed). In either case, Inspiron B130 Dell keyboardsproblems will develop. Fortunately, correcting a finicky keyboard is a relatively straightforward process. First: remove the caps of the offending keys. Be sure to note where each key is placed before starting your disassembly-especially if the Dell keyboards Inspiron B130 is a Dvorak-type or unusual ergonomic design. To remove a key cap, bend an ordinary paper clip into the shape of a narrow U, and bend in small tabs at the tip of the U shape. Slip the small tabs under the key cap and pull up gently. Do not struggle with the key cap. If a cap produces resistance in dismounting, remove one or more adjacent caps. If there is a substantial accumulation of foreign matter in the Inspiron B130 keyboards, you should consider removing all of-the key caps for a thorough cleaning, but this requires more time. Flip the Dell Inspiron B130 keyboardupside down and rap gently on the case. This will loosen and remove any larger, heavier dust particles and allow it to fall out of the keyboard. A soft-bristled brush will help loosen the debris. Return the keyboard to an upright position. Use a can of compressed air (available from almost any electronics or photography store) to blowout the remainder of dust particles. Since this tends to l3low dust and debris in all directions, you may wish tG Lise the compressed air outside or in an area away from your workbench. A medium- or firm-bristled brush will help loosen any stubborn debris.