Dell Latitude D600 Laptop AC Power Adapter Specification:
- Input: AC100-240V (worldwide use)
- Power: 90W
- Output: DC 19.5V 4.62A
- Internal Diameter: 5.0mm
- External Diameter: 7.4mm
- With central pin inside
How to Select the correct dell Latitude D600 AC Adapter
Before purchasing
dell Latitude D600 AC Adapters you need to make sure make the
Latitude D600 AC dell Adapters will give you the correct voltage and suitable current output. To find out the voltage & current, turn your laptop over and look for a label, sticker or writing which shows the voltage and current, it should look something like the examples below. The voltage figure will have a "V" after the number i.e 19V and the current will have a "A" or "mA". i.e 3.15A. You can also find these shown on your original
dell AC Adapter Latitude D600 if you have it. The Voltage must be within 10% of your original
dell Latitude D600 s Voltage. The Amps may be higher but they cannot by lower. If you are purchasing a universal
Latitude D600 AC Adapter or Car Charger you will need to work out the Watts of your original
dell Latitude D600 Adapter and select the universal
dell Latitude D600 AC Adapter or Car Charger with the same Watts or next highest Wattage. You can work out the Wattage by multiplying the Voltage by the Amps i.e 20V X 3A = 60 Watts. There is no 60 Watt
dell Latitude D600 AC Adapters so you will need to select the next step up which is the 70 Watt
dell Latitude D600 AC Adapter.
PLEASE NOTE: If the wattage requirement for your laptop is lower than the 60W or 90W output of the adapter, it will not damage your laptop, your laptop will only take the amount of power it requires. I.E. If your laptop needs 45W, then either the 60W or 90W will work OK. If your laptop needs 80W then you will need the 90W one as the 75W one will not be powerful enough. If in doubt please email us on our contacts page.
